Pumps
CP-200 Chemical Process Pump
CP-200
Heavy-duty process pump with a frame-mounted bearing housing.
Flow rate
Up to 350
m³/h
Head
Up to 150
m
Fluid temperature
-40 to 260
°C
Max. working pressure
25
bar
Overview
The CP-200 follows the horizontal, end-suction process pump layout: a back pull-out casing, a separate bearing frame and a spacer coupling. Wetted parts are specified to the fluid, from cast iron to duplex stainless steel.
A cartridge seal chamber accepts single or double mechanical seals with flush plans.
Key features
Separate bearing frame with oil lubrication
Spacer coupling for seal replacement in place
Seal chamber suited to single or double seals
Wetted-material options by fluid
Datasheet
Technical specifications
Illustrative demonstration data. Units are shown with each value; confirm all duty and material data against the project datasheet before specifying.
Hydraulics
Flow range (50 Hz)
10 – 350 m³/h
Hydraulics
Head range (50 Hz)
10 – 150 m
Connections
Suction / discharge
DN 40 – DN 200, PN25
Drive
Motor power
1.1 – 160 kW
Operating limits
Max. working pressure
25 bar
Operating limits
Fluid temperature
-40 to 260 °C
Sealing
Arrangement
Single or double mechanical
Mass
Pump with baseplate
120 – 980 kg
Materials of construction
Casing
Duplex stainless steel (option: cast iron)
Impeller
Duplex stainless steel
Shaft sleeve
Hardened stainless steel
Seal
Cartridge, SiC / SiC
Standards
Design reference: ISO 5199 / ASME B73.1 class (illustrative)
Operating conditions
Aggressive and hot liquids; material selection by fluid data sheet.
Industries
Tell us the duty point and we will propose the equipment.
Send flow, head or pressure class, fluid and temperature. A demonstration form: connect your own destination before launch.